Rack Gear

Hello there,
Today I am going to talk about the rack gear!

This gear translates circular motion into linear motion. Thanks to the teeth opening to a flat surface, the movement of rotating gear is converted in one direction. It is usually used in automatic doors and drills.

Rack gear manufacturing can be done by using different materials according to usage place and working conditions of the gear. Plastic racks can be used for quiet, non-lubed, non-high-load work environments. They are generally used in many areas such as chemical facilities, paper factories, sugar factories, mining industry, automotive, textile industry, aviation, medical devices, food industry. Plastic Rack Gears compared to metal gears lighter and economical. Also, they are quiet and no need for lubrication. In addition to, they have corrosion and resistance to acidic environments.

It's okay here. Now let's look!

My studies are in this link. 
C ya!

Automotive Series-1

Hello,
I decided to organize a series of automotive parts. This is the first series for now.😊

Engine Valve

• Used for internal combustion engines of motor vehicles.
• It is used to control gas flow in engines.
• Used to control the intake of air into the engine and the emission of burned exhaust gas

Valves used in today's modern revolving high-compression engines must be long-lived and resistant to high temperatures. For this reason they are made of special steel alloys. The intake valves are made from chrome-nickel steel alloys, while the exhaust valves are made from heat-resistant steel alloys (stellite). In some engines both can be made from the same material.

Engine valve solidworks part is here


 Air Turbo

  

• It is not exposed to very high temperatures
• It is usually produced from aluminum.
• Air from the air filter passes through here.

Air Turbo Solidworks Part is here


Engine Air Filter

• During engine operation, large quantities of air taken in the cylinders are filtered to remove dust and dirt.
• Paper filters are used today.
• It can filter even very small particles at a sensitivity of 5 microns.

Engine air filter Solidworks Part is here.


Engine Cylinder Head

• Closes the top of the cylinders
• Build combustion chambers.
• Some of the exterior parts are housed
• It is usually produced from aluminum.

Engine cylinder head solidworks part is here


C ya!

Simple aircraft design

Hi, there!

I made a simple aircraft design. Sole piece. Here.

C ya!

Chemical Reactor

Hello friends,
What's up? Although I was busy this week, I draw a chemical reactor in Solidworks. Let's talk it!

The reactor is a special type of container commonly used in the chemical industry.

Chemical reactors are specially designed products that operate under full pressure and temperature conditions with full vacuum. The chemical reactors use in various chemical operations such as solid dissolution, product mixing, chemical reactions, bulk distillation, crystallization, liquid or liquid extraction, and polymerization.  They are used in studies where chemical reactions are required in sectors such as petrochemicals, the pharmaceutical industry, paper, food, and beverages.

A typical Reactor is a vessel consisting of a mixer and an extensive heating and/or cooling system. Liquid and solid objects are filled through the connections in the top cover of the Reactor. Steam and gasses are evacuated with the help of the connections at the top of the Reactor. The liquid is usually evacuated from under the Reactor.

The dimensions of these containers can range from 20 liters to 40,000 liters. It is usually manufactured from steel, stainless steel, glass-clad steel, glass or alloy.

Learn about stainless steel

Stainless steel is iron-carbon alloys containing high Cr and Ni. Their compositions contain at least 12% Cr.  And the chrome protects it against rusting. When the chrome element in stainless steel is exposed to oxygen (which means oxygen in a normal atmosphere), it immediately forms a chromium oxide (Cr2O3) passivation layer. This layer is so thin and completely obstructing oxygen penetration. In addition, the clearance to be created in case this layer is torn, opened or scratched for any reason, layer a very rapid reformation of the layer itself. (This is called passivation) Therefore, stainless steels have high corrosion and oxidation resistance.

Okay, let's look at the drawing.😊

Here we see reaction tubes

And an explode view

 And a completed reactor

My studies are in this link. 

C ya!